SureShield Microporous Coverall

Description

SureShield Microporous Coveralls provide Protection Against Fine Particles & Liquid Splashes

Protection

Type 5 EN ISO 13982-1 2004+A1:2010
Type 6 EN 13034:2005 +A1:2009
Infective Agents EN 14126:2003
Radioactive EN 1073-2 :2002 Class 1
Anti-Static EN 1149-5 :2008

Feature & Benefits

• Fully elasticated hood, wrists and ankles for maximum comfort and protection.
• Gusseted hood provides additional comfort and ease of head movement.
• Full body zipper makes donning easy.
• Elastic Finger Loops.
• Re-sealable Storm Flap.
• Generous sizing for ease of movement and comfort when bending, reaching or squatting.
• Protection against liquid splashes.
• Breathable fabric allows moisture vapour to pass through the material to keep the wearer comfortable.

Common Areas of Use

• Spray painting, wood & metal processing, asbestos removal, pharmaceutical, herbicide & pesticide spraying, clean rooms, working with fibreglass, resin & powder application & handling low level chemicals.

Fabric Construction

• 60 GSM fabric constructed from a layer of spunbond polypropylene covered with a breathable film that repels fine particulates and liquids.

Understanding the Label

• All SureShield Microporous coveralls contain important information on the neck label which you should read before using the product. Below is a guide for interpreting the label.

1. Coverall brand name
2. Model identification
3. CE Marking confirms Category III approval by INSPEC International Ltd
4. Read this instruction sheet before use.
5. Full body protection types.
6. Size
7. Sizing pictogram showing body measurements.
8. Care Instructions: do not wash, iron, dry clean or tumble dry. Stay away from flames or intense heat.

Information

Storage

• SureShield Microporous coveralls should be stored in dry areas away from direct sunlight.

Disposal

• SureShield™ coveralls can normally be disposed of in landfill or incinerated. Restrictions may apply depending on the contaminant encountered during use. Check with your local council for further details.

Warnings

• Where SureShield Microporous coveralls are used in conjunction with other PPE it may be necessary to tape cuffs to gloves, ankles to boots and hood to respiratory devices in order to achieve full “Type” protection. The user shall be the sole judge of correct combination of PPE and coveralls.
• Wearing coveralls, like many forms of PPE, can lead to heat stress. It is recommended that users adequately hydrate and take regular breaks to ensure dehydration and heat stress does not occur.
• When removing coveralls users should take care to avoid contamination by any hazardous substances encountered while wearing the coveralls. If coveralls are contaminated then standard decontamination procedures should be followed (i.e. decontamination shower).
• The user is responsible for ensuring the appropriate use of SureShield Microporous coveralls and no responsibility will be taken for improper use. Contact your SureShield Microporous provider for information about the correct product for your job.

p